Last Modified: 11-29-2007 1.6 A
Service Category: Vehicle Exterior Section: Wiper/Washer
Model Year: 2008 Model: Sequoia Doc ID: RM000002M67008X
Title: WIPER / WASHER: WIPER SWITCH: INSTALLATION (2008 Sequoia)

INSTALLATION

1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY

(a) Engage the claw and install the wiper switch.

(b) Connect the 2 connectors.

2. INSTALL UPPER STEERING COLUMN COVER

(a) Engage the 4 clips to install the upper steering column cover onto the instrument panel cluster finish panel.

(b) Engage the claw to install the upper steering column cover.

3. INSTALL LOWER STEERING COLUMN COVER

(a) Engage the 2 claws to install the lower steering column cover.

NOTICE:

Do not damage the tilt and telescopic switch.

(b) While turning the steering wheel to the right and left, install the 2 screws and the lower steering column cover.

4. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION (2008 Sequoia)+

5. INSTALL INSTRUMENT SIDE PANEL LH INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION (2008 Sequoia)+

6. INSTALL COWL SIDE TRIM BOARD LH INTERIOR PANELS / TRIM: ROOF HEADLINING: INSTALLATION (2008 Sequoia)+

7. INSTALL FRONT DOOR SCUFF PLATE LH INTERIOR PANELS / TRIM: ROOF HEADLINING: INSTALLATION (2008 Sequoia)+